• >
  • 수입제품
  • >
  • 수입제품
·····························································································································································
Main specifications
ㆍ Fully EN12469 certified by TuV Hamburg.
ㆍ Electrical air-tight sliding sash, with “yzy” movement, operated by soft touch panel (EN12298 tested and
   certified for air tightness).
ㆍ Microprocessor controlled motor blower, with volumetric sensor for exhausted air flow monitoring.
ㆍ Specifically designed microprocessor software and environmental friendly components ensures low
   energy consumption for an high efficiency and reduced heat output.
ㆍ “Silence Within” design: integrated metodology and technology for improved control of surface
   transmitted noise, reduction of noise at the source, elimination of noise propagation, and noise
   emission that guarantees the quietest environment conditions in your laboratory.
ㆍ State of the art Microprocessor control system offering:
   - High resolution large digital display.
   - On line automatic control of airflow volumes.
   - Sliding sash window with smart control.
   - Permanent monitoring of HEPA filters life span.
   - Alarms. Multilevel alarms, with redundancy functions.
   - Permanent display of working conditions.
   - Highest air flow stability both in case of transitionaldisturbances or of progressive filter clogging.
   - Semi-automatic fumigation cycle (EN12297 tested and certified).
   - Fully automatic UV light cycle program.
   - Continuous monitoring of front barrier air flow for the highest operator safety.
   - Low barrier alarm.
   - Power failure alarm.
ㆍ Volt free contact for monitoring of optional remote exhaust fan.
ㆍ Automatic reset of initial conditions in case of power failure.
ㆍ Hydraulic height adjustable support stand (manual and electrical).
Mechanical and functional specifications
ㆍ Sloped front design for the highest operational comfort. Sloped back side of the working chamber for
   the best down flow distribution (cabinet carcass EN12298 tested and certified for air tightness).
ㆍ Utilities inlets from the top of the cabinet.
ㆍ Stainless Steel AISI 304 internal surfaces with 2B finishing (including spillage tray).
   Solid work surface and special designed front grill.
ㆍ 6 mm multilayer safety glass side walls on series.
ㆍ Electrically operated sliding 6 mm multilayer safety glass front window.
ㆍ Comfortable 200 mm front opening at operational conditions.
ㆍ Hinged front glass for easy cleaning procedures (swing out feature).
ㆍ Easy to install retrofit options through side panels.
ㆍ Easily accessible exhaust HEPA filter.
ㆍ HEPA H14 class High Efficiency Particulate Air filters with 99.999% efficiency on 0.3 μ particles
   (most penetrating particle size) (EN1822-1 and EN 13091:1999 tested and certified).
   Safety you can trust Microbiological Safety Cabinet Class II Type A2
ㆍ Filter change and maintenance from the front of the cabinet.
ㆍ Exhaust transitions easily installable.
ㆍ Key operated. The key can be removed when the unit is in SAFE and OFF mode, in order to avoid unwanted    operation.
   In case of power failure, the cabinet is reset to original working conditions.
ㆍ Self calibration cycle performed when cabinet is switched on.
ㆍ Visual display of SAFE conditions. Pre-warning before actual alarm conditions are reached (visual and   acoustic alarms).
ㆍ Soft touch control panel for standard service utilities. Interconnected UV and fluorescent lights.
ㆍ Exhaust and recirculating flow rates ensure 25 air changes/min in the working area (30% 70% split).
ㆍ Front barrier air speed ≥ 0.5mt/sec.
ㆍ Aperture protection Factor (Apf) ≥ 1.5 x 105 (retention efficiency).
ㆍ Cleanability Index C grade (EN 12296 tested and certified).
ㆍ Light intensity on work surface ≥ 1200 lux.
ㆍ Noise level ≤ 55 dB(A) (ISO 11201, ISO 4871 and ISO EN 3744 tested and certified).
ㆍ Work surface displacement (vibration) <0.005mm RMS between 20Hz and 20,000Hz (ISO 5349 tested and   certified).
ㆍ 220/240V, 50Hz.
ㆍ Max power (for each power point) 3Amps.
ㆍ Microprocessor equipped with analogical watch dog.
ㆍ CE certification according to Machinery. Directive 89/392/EEC, 91/368/EEC, 93/44/EEC 93/68/EEC.
·····························································································································································
Stainless Steel AISI 304 internal surfaces with 2B finishing
(including spillage tray).
Solid work surface and special designed front grill.
Cleanability Index C grade (EN 12296 tested and certified).
Light intensity on work surface ≥ 1200 lux.
Programmable mobile UV kit interlocked with fan and
front window position, ensures high decontamination
and optimizes bulb lifespan.
UV fitted on rear wall available on request.
High resolution large digital display.
Permanent monitoring of HEPA filters life span.
Alarms. Multilevel alarms, with redundancy functions.
Permanent display of working conditions.
Continuous monitoring of front barrier air flow for the
highest operator safety.
s@femate vision : the 6 mm safety glass walls offer excellent visibility and easy cleaning.
·····························································································································································
Front Top Side “Vision” Side
Model s@femate 0.9* s@femate 1.2* s@femate 1.5* s@femate 1.8*
Work chamber dims (wxdxh) mm 924 x 600 x 700 1230 x 600 x 700 1530 x 600 x 700 1840 x 600 x 700
Overall dims (wxdxh) mm 1074 x 840 x 1450 1380 x 840 x 1450 1685 x 840 x 1450 1990 x 840 x 1450
Height on stand mm 2175 2175 2175 2175
Front opening mm 195 195 195 195
Weight Kg 160 190 230 300
Power supply single phase 220/240 V - 50 Hz 220/240 V - 50 Hz 220/240 V - 50 Hz 220/240 V - 50 Hz
Power W 350 400 550 750
Noise level dB(A) ≤ 55 ≤ 55 ≤ 57 ≤ 57
Lighting lux ≥ 1200 ≥ 1200 ≥ 1200 ≥ 1200
* Also available as “Vision” series with lateral glass sides and “BS” series with integrated dual exhaust filter
How to order
Class II Type A2 Microbiological safety Cabinets
LDD0000 S@femate 0.9
LDE0000 S@femate 1.2
LDF0000 S@femate 1.5
LDG0000 S@femate 1.8
Class II Type A2 Microbiological safety Cabinets with glass sides
LDD0200 S@femate 0.9 Vision
LDE0200 S@femate 1.2 Vision
LDF0200 S@femate 1.5 Vision
LDG0200 S@femate 1.8 Vision
Class II Type A2 Microbiological safety Cabinets “BS” (Dual exhaust HEPA Filter)
LDD0300 S@femate 0.9 BS
LDE0300 S@femate 1.2 BS
LDF0300 S@femate 1.5 BS
LDG0300 S@femate 1.8 BS
■UV LAMP
Installed standard utilities:
- 1 Gas tap with solenoid valve.
- 1 Vacuum tap.
- 1 Electrical socket type Schuko
(2 each on 1.8 model).
- 1 Multifuction socket
■ OPTION
Stands and UV
AS1D000 Stand for all 0.9 models
AS1A000 Stand for all 1.2 models
AS1B000 Stand for all 1.5 models
AS1C000 Stand for all 1.8 models
AKC0001 Mobile UV light kit
Please enquire about the many option and accessories available.